产品资料

超声波螺栓应力测试仪Boltstress

如果您对该产品感兴趣的话,可以
产品名称: 超声波螺栓应力测试仪Boltstress
产品型号: Boltstress
产品价格: 0.00 元
折扣价格: 0.00 元
产品文档: 无相关文档

简单介绍

Boltstress超声波螺栓应力测试仪上海五久自动化设备有限公司专业自动化成套供应商,主营产品有压力仪表,温度仪表,传感器,无损检测设备,开关等多种配件和设备,力争做到人无我有,人有我优。有需要可以联系公司在线客服。欢迎您的光临。


超声波螺栓应力测试仪Boltstress  的详细介绍

Boltstress超声波螺栓应力测试仪

Boltstress G5 Ultrasonic Bolt Tension Measurement System

Measuring

Units: English & Metric / Farenheit & Centigrade

Range: From 1 in to 96 in (2.54 mm to 2438 mm) bolts.

Elongation: Change in length (inches/millimeters).

Load: Force load applied (pounds Force lbsF or Kilonewtons Kn).

Stress: Force for unit area stress applied (pounds per square inch or newtons per square millimeter Mpa).

Strain: Percentage Elongation over Effective Length (%)

Time: Nanoseconds.

Data Logger (Internal)

Total of 8,000 readings, multiple bolt groups. Stores both waveform views, nanoseconds, elongation, load, stress and strain for each reading.

Memory: 16 megabit non-volatile ram.

Alarm Limits: Set Hi and Lo tolerances with audible beeper, viewable scan bar, and visual LEDs.

Auto Set: Locates the detection signal, optimizes the gain setting, and adjusts the overall display to show the waveform and detection point automatically.

Field Calibration: Vector & linear regression.

Setups: 64 custom user defined setups. Factory setups can also be edited by the user.

Gate: Gate used to fine adjust where the detection point occurs.

Physical

Size: Width (2.5in/63.5mm) Height (6.5in/165mm) Depth (1.24in/31.5mm)

Weight: 13.5 ounces (with batteries).

Display: Membrane switchpad with twelve tactile keys.

Operating Temperature: 14°F to 140°F (-10°C to 60°C).

Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).

Data Output: Bi-directional RS232 serial port. Windows® PC interface software.

Display: 1/8 in VGA grayscale display (240 pixels x 160 pixels). Viewable area 2.4in x 1.8in (62mm x 45.7mm) EL backlit (on/off/auto).

Ultrasonic Specifications

Measurement Modes: Pulse-Echo (standard) Pulse-Echo w/Gate (fine adjust)

Pulser: Square wave pulser with adjustable pulse width (spike, thin, wide).

Receiver: Manual or Auto Set gain control with 40dB range.

Timing: 10-bit 250 MHz digitizer.

Resolution: +/- 0.00001in (0.00001 mm)

Velocity Range: 0.0492 to .3937 in/ms (1250 to 9,999 meters/sec) Fixed, single, and Two point zero calibration options. Select bolt material types from a preset or custom list.

Display

A-Scan-Rectified +/- (half wave view), or RF (full waveform view).

Large Digits: Display and toggle between nanoseconds, elongation, load, stress, and strain.

Digit Height: 0.400 in. (10mm.).

Limits Bar (alarm limits): Set Hi & Lo alarm limits for displaying an acceptable tolerance range.

Repeatability Bar Graph: Bar graph indicates stability of measurement.

Power Source

Three 1.5V alkaline or 1.2V NiCad AA cells.

Typically operates for 150 hours on alkaline and 100 hours on NiCad (charger not included).

Auto power off if idle for 5 min. Battery status icon.

Transducers

Transducer types: Single element (1 MHz to 10 MHz & 1/8in to 1in diameters).

Locking quick disconnect "00" LEMO connectors.

Standard 10 foot cable. Custom transducers available for special applications.

Temperature probe for automatic temperature compensation.

Certification

Factory calibration traceable to national standards.

Warranty

2 year limited.

Applications

Our system is primarily one of prevention; the applications below are only a few examples of our experience.

Mills

The structural joints on Ball, Rod & SAG Mills are highly critical. There are several known cases where torque alone has been relied on and the consequences have been dire. Joint separation occurs causing leakage and major repairs. The downtime costs are often stated in the region of $1Million per hour.

Heat Exchangers & Pressure Vessels

ASME VIII & AS 1210 allow Engineers to design flanges specific to the application. In order to be competitive this often results in small as possible flanges. This in turn gives an un-reliable bolted joint. By controlling the bolt loads very accurately we prevent leaks and ensure integrity.

Slew Ring Bearings

Found on Cranes, Turrets and FPSO's these items have a history of bolt breakage and early bearing failure. By ensuring correct original pre-load, and adopting a regular re-measure regime, clients can get the maximum life between major re-fits.

Valves

Valves by their very nature often see high levels of thermal and pressure cyclic loading. In many cases this is coupled with stud-bolts screwed into tapped holes. Due to the lower than normal clamp length joint reliability is greatly reduced. By ensuring correct original pre-load we prevent joint failure.

Turbines

Due to creep strain relaxation half Joints & valves mostly have a requirement for bolt elongation to be highly controlled. Traditional Extensometer measurement methods are inaccurate and un-reliable; we replace that with a guaranteed accuracy of results (NATA Traceable) and electronic data management.

In addition to these we have also used this technology on High Performance Engines, Rotating Equipment Couplings, Furnaces, Structural Steelwork, Manifolds & many more.

 UV-2102C  UV-2000  1800  7202(B)  L6S  leeb322 LS120   leeb331  leeb210 leeb   Leeb221 leeb451   Leeb220  leeb332 LS130   leeb520C  leeb610  leeb522C  leeb521C  LSA620  LSA610  TR210 LRA650S   leeb430  leeb-522A  LSA620S TR110   leeb521A  leeb620  TH132  TH220 TH200  TT110  TT310  TUD280  TT320  TUD220  TCP100   TUD360 TH520   leeb110 TBS-V801   Leeb230  Leeb231  leeb 252 TH-140  TT140  TT130  TT260F1  TT300A  TUD210  TT120  TT230  TH110  HLN-11A  PT300  TH-600  PT300B  TBS-CN22ES  TT100  TT100a  ETI200  TT300  TT340  VM-63A  TH700  TUD300  TT150  TT290  TT210  TUD310  TBS-F801  TCP200  PT120E  TA230  TH121  TH161  TH136  TH-134  TH120  TT260N1  TT270  TT240  TUD320  TT220   leeb140 TI300

沪公网安备 31011402002796号