产品资料

交流真空断路器ZN65A40.5

如果您对该产品感兴趣的话,可以
产品名称: 交流真空断路器ZN65A40.5
产品型号:
产品价格: 0.00 元
折扣价格: 0.00 元
产品文档: 无相关文档

简单介绍

交流真空断路器ZN65A40.5 ZN65A40.5系列户内高压交流真空断路器为一种超高寿命真空断路器,系额定电压40.5kV、三相交流50Hz的户内高压电器设备。其突出的特点为机械寿命12万次。适用于工矿企业、变电站等输配电系统,尤其适用于冶金、电弧炼钢等,作为控制和保护设备。


交流真空断路器ZN65A40.5  的详细介绍



交流真空断路器ZN65A40.5


用途

ZN65A40.5系列户内高压交流真空断路器为一种超高寿命真空断路器,系额定电压40.5kV、三相交流50Hz的户内高压电器设备。其突出的特点为机械寿命12万次。适用于工矿企业、变电站等输配电系统,尤其适用于冶金、电弧炼钢等,作为控制和保护设备。

结构及特点

该断路器结构简单,主要由真空灭弧室、操动机构及支撑部分组成,在机构箱上固定6只绝缘子,3只灭弧室通过上、下出线固定在绝缘子上。下出线端上装有软连接,其中软连接的下端分别固定在下出线上。操动机构为弹簧储能式,操作功能极全。可用于交流或直流操作,也可用手动操作。机械寿命长、无爆炸危险、维修简便。灭弧室采用了独特的球形定位,各个传动部位采用了固体薄膜处理技术,使得机械寿命达到了12万次,在国内属开创产品,填补了我国高寿命真空断路器的空白。

订货须知

订货时应注明断路器型号、名称、主要技术参数及订货数量;电动机电压种类及参数、脱扣器种类及参数、数量、辅助开关接点对数:合、分闸电磁铁电压,用户如果需要其他备品须在订货时提出。








Product Overview

The Deepwater RetroPod cathodic protection system has saved many operators hundreds of thousands of dollars in offshore CP retrofit costs. This is achieved by installing an optimized array of sacrificial anode material (capable of delivering up to 20 Amperes) in less than a quarter of the time it would take to install the equivalent CP using clamp-on anode arrays.

An installed RetroPod is located on bottom, just inside or outside the base of the jacket. This semi-remote location greatly improves current distribution, and the installation can be accomplished with divers or ROV’s using the RetroClamp™ tieback system.

Small, shallow 4-pile jacket structures can often be retrofitted with only one or two pods, thus several can be completed in a single offshore day.

Four small booster anodes are added to the RetroPod when a structure has lost all cathodic protection. The additional upper anode array provides a 15% current boost for the first 2-3 years to quickly re-establish cathodic polarization.

Like all of Deepwater’s innovative CP retrofit solutions, the RetroPod is guaranteed to perform. Hundreds have been successfully installed.

Main Benefits

Reduces retrofit installed cost to approximately 1/3 of a conventional clamp-on fix. Many direct comparisons are documented.

Improved safety; no direct diver intervention with heavy load. Safe 24 hour operation maximizes offshore efficiency.

Optimized shape reduces mutual anode interference, gives excellent bottom stability, and provides ease of handling offshore.

No increased weight loading on an aging structure and no problems finding places to clamp anodes.

Easy to inspect during routine subsea inspections; current output from each pod can be displayed if required.

Modular construction allows simple re-configuration for 10 to 25 year life extension in 5-year increments.

Materials

RetroPod uses the highest available quality of sacrificial anode alloys. Typical ambient and cold water Al-In-Zn compositions are used. All steel fabrication uses ASTM A 36 material and is performed in Deepwater's manufacturing facility as well as at sub-licensed facilities in various regions.

Design Life

10 to 25 years (depending on customer requirements).

RetroClamp Tie Back

Each RetroPod is shipped with one or more RetroClamps; typical cables are 2 x 25 feet #4/0 AWG heavy duty flex cables. Thousands of these clamps are now in service around the world, and many have been installed by ROV. The installation efficiency of the RetroClamp has saved customers hundreds of thousands of dollars.

RetroPod in situ sits 10 ft. from the
base of the structure on bottom, either
inside or outside of the jacket.

Concrete mattresses provide ample
ballast to insure stability at the base.

RetroClamp is readily available from Farwest Corrosion Control Company.

Illustration showing the Clamp
being installed by an ROV.

The RetroClamp tie-back in situ.


 




沪公网安备 31011402002796号