产品资料

SDT-FS8MS八合一发射器

如果您对该产品感兴趣的话,可以
产品名称: SDT-FS8MS八合一发射器
产品型号: SDT-FS8MS
产品价格: 0.00 元
折扣价格: 0.00 元
产品文档: 无相关文档

简单介绍

SDT-FS8MS八合一发射器上海五久自动化设备有限公司专业自动化成套供应商,主营产品有压力仪表,温度仪表,传感器,无损检测设备,开关等多种配件和设备,力争做到人无我有,人有我优。有需要可以联系公司在线客服。欢迎您的光临。SDT-FS8MS八合一发射器SDT-FS8MS


SDT-FS8MS八合一发射器  的详细介绍
SDT-FS8MS八合一发射器SDT-FS8MS八合一发射器SDT-FS8MS
SDT Multi-Transmitter - Adjustable Power
Description
SDT manufactures two Ultrasonic Transmitters for verifying tightness integrity (wind noise, water leaks, weather tightness etc? of any volume; The SDT 200mW and the SDT 8 Multi Transmitter. The SDT 8 Multi Transmitter (pictured left) is for use in large volumes such as cargo ships, submarines and other navy vessels with watertight doors, buses, trains, airplanes, passenger vehicles etc
Ultrasonic transmitters generate dual high frequency signals. These signals are small and therefore able to pass through very small leaks. When the transmitter is placed inside a volume (cargo hold for instance) the entire volume is flooded with dual ultrasonic waves. Use an SDT ultrasonic detector outside the volume to find and pinpoint the exact point of leakage.
Testing Cargo Ship Hatch Covers:
SDT Ultrasonic Testing is Type Approved worldwide by major shipping classification societies such as ABS American Bureau of Shipping, Lloyds Register, and DNV. P&I Clubs around the world recognize SDT ultrasonic hatch cover inspection as a major contributor to the reduction of insurance claims from water damaged cargo. Use the SDT 08 Multi Transmitter with the SDT Sherlog Detector for Type Approved inspection and data collection of hatch cover weather tightness.
Testing Automobiles on the Assembly Line:
SDT Ultrasonic is widely used by major manufacturers such as Ford, Daimler Chrysler, Toyota, Mitsubishi, Hyundai, General Motors, Bombardier, and others. The elimination of water shower booths on assembly lines is the primary motivation for integrating ultrasonic tightness testing into the quality control applications for wind noise and water leaks. The principles are the same for automobiles and hatch covers.
The SDT 8 transmitter is equipped with a lead-acid battery and weighs approximately 2 lbs. The equipment can be used in temperatures ranging from 5to +50.
1. The ultrasonic sensors
Eight sensors are laid out in the equipment such that they transmit in the volume of a hemisphere.Each ultrasonic sensor is frequency and power stabilised. The transmission frequency is 39.2 and 39.6 kHz (bi-sonic mode) at a power of 125 mW.
2. Indicator
A red indicator integrated in the ON - OFF switch shows whether the equipment is switched on and the charge level of the battery according to the following code:
Indicator Equipment On - Equipment switched on. - Battery charge correct.
Flashing - Equipment switched on. - Battery charge incorrect.
The speed of the flashing increases as the charge decreases.
Off - Equipment switched off or - With switch in on position indicates an insufficient charge.
3. The ON-OFF Switch
Located at the base, this switch enables the equipment to be switched on (ON position) or off (OFF position).
4. The Charge Plug
Marked LOAD (charged), it enables the internal lead battery to be recharged without taking the equipment apart. Overcharging is not possible if the charger delivered with the equipment is used.
5. The Battery
Lead-acid type and sealed, the battery is accessible after the lower protection lid has been removed. The rated voltage is 12V and its capacity is 1.2 Ah at 20 C; the autonomy is 2.5 hours for a 6 hour charge.
Technical Data:
Transmission Characteristics:
Function: Ultrasonic Transmitter
Frequencies: Stabilized at 39.2 and 39.6 kHz (bi-sonic mode)
Number of transducers: 8
Transmission power: Stabilized at 8 x 125 mW
Dispersion: 8 x 60?/DIV>
Supply Voltage/capacity: 12V DC/1,2 Ah
Battery: Gelled lead-acid rechargeable
Recharge: By means of an external charger and integrated connector (without removing the battery) or by using a charge adapter (removing the battery).
Autonomy: 2.5 hours at 20
Charging time: 6 hours
Safety: Chemical control fuse with automatic reset.
On/Off switch:
Command: By ON/OFF switch
Visual indication: ON/OFF/battery charge control indicator. Flashes when undercharged.
Others:
Temperature range: -4癋 to 122癋 (-20?C to +50?C)
Hygrometry range: 0 to 95 % RH non condensing
Dimensions: Length: 6.3?x Width: 3.9?x Height: 3.75/DIV>
Weight: 3.3 lbs
Order Number FS8US or FS8MSUS contains:
FUSUIT8 Plastic case (blue) SDT8 + foam
FU8S or FU8MS SDT 8 Standard or Multi Setting with battery and user manual
FUPS8US/EU/AS Battery charger for SDT 8 (US=110VAC, EU=240VAC Europe, AS=240VAC Asiatic)
FUBATAD8 Battery charger adapter SDT 8
FUBAT8 Battery pack SDT 8
FUHOLSLEATH8S Leather case for SDT 8 with shoulder trap
FUTOSCRDRIV Screw driver for battery cover

S-150-7.5  S-600-12  3TF44-45  BK-30KVA  S-75  DW10-600A   LXZ1-05Z/W  S-320-12  QZB-45KVA  XCK-P121  D4MC2000  DW10-400A   LXZ1-04Z/N.G  DF1-B  S-250F  S-350-12  3TB56   KT10-100A   JMB-30KVA  XCE-181  D4C1510  D4C1501  THQ1-25A   QJ3-22KW  MQ1-1.5KG  D-60A  QZB-75KVA  ZHQ1M   CJ40-315A  CJ40-500A  CJX1-22  CJ20-100A  CJ40-400A  CJX1-475  CJX2F500  S-100-27  ZHQ1Z   CJX2D475  CJX2-9511 

SDT-FS8MS八合一发射器

SDT-FS8MS

SDTFS8MS

SDT-FS8MS

SDT-FS8MS八合一发射器

SDTFS8MS

沪公网安备 31011402002796号