Introduced in 1965, the Model 1700 was designed to enable the user to observe and measure the "creep" present in a specimen. Creep refers to the tendency of the durometer indentor to continue to penetrate a specimen over time, giving lower durometer readings. For example, if the durometer is held against a specimen in full contact and with constant pressure, the durometer reading will decrease over a period of seconds after the initial reading is taken. So, in a specimen with creep, the initial reading may be 35.0 durometer points, while the reading after three seconds may be 33.5 durometer points. The Model 1700 features a max- hand and an active hand so that creep may be observed. The max hand holds the maximum reading while the active hand can be observed creeping down the scale. The 1700 is equipped with a max-hand reset button on the top left of the gauge. 邵氏橡胶硬度计
上海五久自动化设备有限公司是一家专业提供仪器仪表，自动化成套，维修配件，电子电工，无损检测仪表，气动元件，液压元件，传感器等产品的一站式供应商。欢迎您的惠顾。
Elcometer112/2 401MVA ™ XJGA-3212 2100ATACCD MRD600 VTA511 GNBB-800 500MRA/S™ 500MRA/L™ 401MVD™ GH819006 2000 GH212007 EQUOTIPG XJGA-3222 GNBB-200 AK50 CM-8828 MI2020 GH221006 QUC-200 DF-2000 CH-370 GH98900 CH-350 KKCL400 DMV-DL TM8810 GH189007 XY8000 XS10-0005 XJGA-3203 Elcometer112/1 Elcometer345 Elcometer212/2 Elcometer211/1E Elcometer157 XWFJ-101 GH199007 25DL PLUS XJGA-3100 LH900 LE900 XJGA-3304 LE330J Rapidscan BHT-4M/3000 BLR-1/5000 Elcometer111-7F Elcometer113/2B BLR-1/M/300 PR1592 FD-N / Elcometer126
RX-1700-E
硬度计RX-1700-E
RX1700E
沪公网安备 31011402002796号
