OK手套箱氧分析仪/氧变送器
KF flange, diffusion type
Compact, easy installation
Long life zirconia sensor
Five to ten years expected operational life
Sensor will not dry out or freeze
Low maintenance
Low cost
Caution:
Never expose the KF sensor to flammable gases.
Please install the KF sensor horizontal.
The KF sensor needs a circulation inside the glove box.
Please keep the power at right voltage.
Description:
The OK series transmitter is a cost effective solution in a small package for oxygen measurement and control applications. It is compact, cheap and easy installation and designed to provide the trained engineers with useful information relating to the concentration of oxygen in non-flammable gases and non-hazardous area. Its microprocessor based main board can offer accurately output for trace levels oxygen concentration. It is ideally suited for installed in inert chamber or glove box at normal atmosphere.
Technical parameters:
Measuring Range: 0-1000ppm
Sensor Type: Zirconia Oxygen Sensor
Accuracy: ±2% of Span Gas
Response Time: Approximately 6 sec. for T95
Installation: KF Flange
Measuring Type: Diffusion
Operating Temperature: 0° to 45° C (32 - 113° F) Steady State
Operating Humidity: 0-90% Non-condensing
Operating Pressure: Normal Atmosphere
Calibration@ 1% v/ min*:Span/ Zero or Span/ Middle/ Zero Gas
Analog Output: 4-20mA or 20-4mA Selectable
Digital Interface: RS485 for Calibration/ Setting
Power: 12.0 VDC
Power Consumption: Maximum 2A
1% v/ min* means the circulation rate is 1 liter/min in a 100 liters of glove box.
OK/
OK手套箱氧分析仪/氧变送器